| Cylinder Heads, Porting & Valve Trains DVD Set
By: Arron Johnson - Power Building Videos
This 5 hour DVD set will take you step-by-step through the basics and advanced work on the entire valve train.
Designed for the person that isn't yet an expert engine
builder. Includes many different types of cams (flat
tappet, hydraulic roller, solid roller,), lifters, springs, push rods,
various cast iron and aluminum heads and more. You'll see what
"lift", "duration", "overlap" and "lobe centers" mean, and how they
affect your engine. You'll even learn how to degree a camshaft!
You'll see the difference between aggressive profile
cams and mild profile cams and find-out what they do and how to choose
the right one for your application. You'll also learn about the
different types of lifters, rocker arms, rocker studs, valve springs,
retainers, locks, intake and exhaust runners. Learn how to install larger valves,
install screw-in studs and guide plates, un-shrouding valves in the
combustion chambers, gasket matching (heads AND intake manifolds) and bowl
blending. Learn what tools you'll need and how to use them. Learn about O-ring head
gaskets, aluminum heads vs. cast iron heads and what you can and can't run
on the street. No cylinder head topic is left unexplained.
You'll see various types of heads tested on a flow bench and learn the differences between stock, mildly ported and aftermarket aluminum heads.Some of the Topics Covered: - Degreeing Camshafts
- Various Profile Cams
- Flat Tappet Rollers
- Hydraulic Rollers
- Solid Rollers
- Pushrod Lifters
- Springs
- Cast Iron Heads
- Aluminum Heads
- Rocker Arms
- Valve Springs
- Intake & Exhaust Runners
- Define "Lift"
- Define "Duration"
- Define "Overlap"
- Define "Lobe Centers"
- Proper tools & techniques
This 3 disc set is an excellent advanced learning tool after using our 'Basic Engine Building' DVD.
Get all 5 'Power Building Videos' Here.
| Power Building Videos
Part# BXW-PBV-HPV
$29.95 |
|
